We haven't cut into the stock wiring harness yet..
Why cut anything off the wire harness? It's still a wire out the end of the connector, right? Safety wire jammed at the back of the connector, thru the orange weatherpac rubber; ohm the prong and safety wire with goop glue on the safety wire and the wire coming out you are using. Solder a wire on the safety wire = No harness was tampered with.
You get the idea about soldering the wire on the safety wire first, then poke it in the weatherpac, pin check, glue down, let dry, pin check again. I'm done with the mod, I pull the safety wire out, sell the bike, someone looks over the wiring, nothing points to the butcher on the block can't meguyveer up.
Tormenting the motorcycling community one post at a time